The Bikeriser™
The Bikeriser™
The Space Saving Bicycle Wall Mount
The Bikeriser is a compact wall-mounted bike storage solution that takes 5 minutes to install. Ideal for garages and apartments, those with limited space or as an epic way to display your bikes.
Flat rate $9.95 Shipping From Australia | 60 Day Returns.
- Compatible Guarantee
- 12 Month Warranty
- 10K+ Happy Customers
Better Bike Storage
Displayed like a work of art. Off the floor and out of the way.
Collapsible content
SPECIFICATIONS
Weight | 1KG / 2.2 LBS |
Max Load | 32KG / 70 LBS |
No. of Bikes on Standard Wall | 3 (Vertically) |
Material | Steel (3mm), 3M silicone |
Powder-coated | Yes |
Pedal Protection | Yes |
Mounting Hardware | Yes |
Instructions | Provided Online |
COMPATIBILTY
BIKE FRAME
Suitable for all types of bicycle: Kids, Road, MTB (hard tail, dual suspension & DH), Cruisers, E-bikes (up to 32KG/66LBS)
PEDALS
Works with all types of pedals from small clip-ins to large platform.
Not suitable for Race Face Atlas, OneUp Aluminium Pedals, Wah Wah 2 & Spank pedals.
Pedals should measure less than 22mm in diameter above the threaded section. Click here for diagram.
HANDLE BARS
Suitable for handlebar lengths up to 820mm.
SHIPPING
- USA 2-7 BUSINESS DAYS
- AUSTRALIA 2-7 BUSINESS DAYS
-
Saves Space
The most space efficient bike storage system on the market. Clearing all floor space.
-
Most Compatible
Designed with every rider in mind. Bikeriser works with 98% of pedals, from small clip-ins to large platforms.
-
A Work of Art
Display your pride and joy the way it should be, as a work of art. Improve the atmosphere of any room.
-
Safe & Secure
Bikeriser™ does not make any contact with the frame, keeping it safe from scratches.
Why Bikeriser
What's Included
-
1x Pedal Hook
-
2x Tyre Mounts
-
7x Screws
-
14x Wall Anchors
I have vintage road bikes from the 70s that I was able to hang up in the foyer entrance way of my house . Clean easy mounts not very noticeable . I like the angle it provides .
The installation of the bike riser was completed in about 30 minutes by myself (not too gifted in construction/ basic home owner skill set). Getting the pedal mount installed first and then the tire ledge is key to get the alignment correct. Instructions are provided but with all the different frame, wheel, tire geometry etc it’s difficult for them to provide an accurate description for your specific bike. Some imagination is necessary for getting the location of where the bike hangs on the wall just right. Overall I’m happy with the product and would recommend.
I installed four of the Bikerisers and they were easy to install and really cleaned up the garage of bikes. I am able to back my truck in and have plenty of room with my two bikes mounted on the wall.
Highly recommended!
We’ve tried a few different storage options, including wheeling the bikes around to rooms of the house and hoisting the bikes into the garage rafters. Either way, bikes were always in the way. With Bikeriser, I’m still able to park two cars in the garage. I’m not the strongest person, so I only pull the lowest bike off the wall, my husband has no trouble pulling the highest bike off the wall over the other bikes.
I was happy to find the mounting hardware was good quality . The plaster board plug screws were the metal ones which gave me confidence in the mounting method.
We installed 4 bikes using the Bike Riser and can't love them enough! They were easy to install and adjust for each of our bikes. We got them all on one wall and my car easily can be pulled into our smaller garage. It is a great use of space. We can get the bikes on and off the pedal support easily every time. GREAT DESIGN! We couldn't wait so painting the garage will be later on our to do list. They are easy to remove or even paint around them.
Hanging your bike is now as easy as hanging a picture . It’s up and out of the way and super easy to get it down or put it back up. When the bike is up it’s practically impossible to even see how it stays on the wall ! Super sleek and easy to install!
FAQ
My bike is usually dirty. Won't it mess up my wall?
Your bike won't actually make any contact with the wall, Bikerisers tyre mounts protect the wall from contact.
Will the constant pressure on the crank and bottom bracket cause any damage?
No. Bicycle cranks and BB's are made to withstand much more force than just the bike's weight. The tyre mounts also support the bike's weight; therefore, the force applied to the crank and BB whilst mounted on the Bikeriser are minuscule.
What if I bumped my bike? Would it fall off?
Highly unlikely. Whilst mounted to the Bikeriser, gravity does a great job of locking your bike in; it is very secure and will only come out when lifted.
How do I install my Bikeriser?
Check out our installation guide here.
Do you ship overseas?
We currently only ship within the United States and Australia. However, we plan to expand to the rest of the world shortly, sign up to our mailing list to find out when we can ship to you.
Will this work with FAT tire bikes?
Yes, FAT bike tyres do work with the Bikeriser.