Le Bikeriser™

Works as advertised! Solved my bike storage problem and freed up valuable floor space. Great product.

These are easy to install and work exactly as described. I have a small garage with a car and 4 bikes so I needed to use as little space as possible. Bikeriser was perfect for the job.

Buy the Bikeriser! That’s the review

Great storage solution to free up garage space and keep the bikes away from banging into the car door when your child kicks the door open like the swat kicking in front a door. Install was a breeze and took about 45 minutes for all four bikes. Great product and the price for quality was on point.

The installation took a while to set up. I wanted to evenly distribute most of the bike weight onto the two wheel brackets, not relying solely on the pedal hook. The pedal hook is mostly for "bracing" the bike and preventing it from falling side ways. This requires a precise alignment of the 3 contacting points especially the placement of the wheel brackets. The nice part was that the brackets were all perfectly aligned with stud placements. The standard American stud distance is 16"(40cm). A mtb wheelbase is about 120cm(Epic Evo Large), spread across 4 studs. So the two wheel bracket could be mounted to the #1(front wheel) and #4(rear wheel) stud. The pedal hook was mounted on #3 stud, drivetrain facing away from the wall. The height adjustment between the pedal hook and wheel brackets needed to be fine tuned. Set the pedal hook height first, then the two wheel bracket. Follow the instruction.

A minor annoyance: If your bike has a flip chip to fine tune the bike geometry, the positioning of the wheel brackets might be tricky because the geometry of your bike can change a little bit. I originally set my Specialized Epic Evo in high mode(steeper head angle for about 0.5°) when I installed the wheel brackets. But after I changed the flip chip to low mode, the wheels were "lifted" from the bracket because the bike became "slacker" and the BB was dropped. The gap between the tires and the bracket were only about 1/4" though. I put in two pieces of 1/4" MDF to take up the space so the weight of the bike can still be distributed onto the wheel bracket. I switch the flip chip according to the type of riding I do. If you don't change the flip chip or your bike doesn't have two geometry modes, then this wouldn't be an issue.

Absolutely brilliant, very pleased with everything, turned up quickly, excellent instructions with all fixings included. Looks pretty cool too and has freed up space in the garage, second one is on order and will put up at the weekend

The Bikeriser wall hanging system does exactly what it claims. Installation was straightforward, especially with a studfinder to make sure everything was secure. We use it for our electric bikes, which are heavier and a bit challenging to hang alone, but once they’re up, the space savings is absolutely worth it. Solid product, no regrets!

Much better than old style bike brackets that hold the bike by the frame. Would highly recommend.

Just 3 things to install, nice quality. Even the installation parts are all metal. Just a great simple product that allowed me to park my car back in the garage. Love it

This was the perfect solution for wall-mounting my recently restored 1981 Peugeot PFN-10 road bike. It is now on display in the garage and easily accessible for use, but protected from damage. So much more attractive and convenient compared with hanging it from the ceiling!
Thank you BikeRiser!